Suitable for positive tank isolation, MMC B-type vapor-control valves are positive shut-off units that support Tri-mode tank gauging functions (ullage, interface & temperature) as well as oxygen sensing. They are available in three models. The original B-type, Micro “B” and the MMC (Asia) F50 are all 2-inch (50mm) full-bore valves. All valves are flanged for ease in installation and accurate positioning. Constructed of 316 stainless steel with a stainless steel cap, they have stainless steel ball valves with Teflon seals. In addition, 1/2 or 1/3 liter sampling is available in all 2 inch sizes with the use of MMC sampling tapes. All gauging tapes fit directly into any type of MMC vapor-control valve.
Viton ® used for all other seals. A stainless steel cap is standard and a selection of other seal materials are optional. (Viton ® is a registered trademark of DuPont Dow Elastomers.)
Mounting Flange Dimensions:
Weights:
This grouping of hydrometers are not ASTM – but are enormously popular in the same applications as the ASTM 21 through 39H hydrometers. All are 165mm in length, graduated in 0.2 API divisions, and made to the same demanding tolerances as ASTM hydrometers. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
Approximately 190mm (7-1/2″) Length. Thermometer in body. Not ASTM designated, but made to similar specifications. Popular due to the smaller sample amount (approx. 6 ounces) ounces needed to obtain a reading. Made to the same demanding tolerances as ASTM hydrometers. Accuracy: +/- 1 scale division. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
Eight hydrometers 500-231 thru 500-238 below, covering the range from .700 to 2.000 A thermometer range 0/230 °F is included. Supplied in a sturdy foam cushioned case with carrying handle. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
.070° Specific Gravity ranges, 6″ length. Made to the same exacting standards as ASTM hydrometers, these units have found wide application due to their slightly longer, overlapping ranges. Accuracy to +/- .001 Specific Gravity. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
.070° Specific Gravity ranges, 13″ length. Made to the same exacting standards as ASTM hydrometers, these units have found wide application due to their slightly longer, overlapping ranges. Accuracy to +/- .0005 Specific Gravity. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
