_Animated.gif)
Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.
Call us today to configure your specific MMC with optional tape verification.
Tape Accuracy: +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).
Temperature Accuracy: +/- 0.2 °F (+/- 0.1 °C) per API Chapter 7 specifications
Range: 32 °F (0 °C) to 176 °F (80 °C).
This grouping of hydrometers are not ASTM – but are enormously popular in the same applications as the ASTM 21 through 39H hydrometers. All are 165mm in length, graduated in 0.2 API divisions, and made to the same demanding tolerances as ASTM hydrometers. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
Approximately 190mm (7-1/2″) Length. Thermometer in body. Not ASTM designated, but made to similar specifications. Popular due to the smaller sample amount (approx. 6 ounces) ounces needed to obtain a reading. Made to the same demanding tolerances as ASTM hydrometers. Accuracy: +/- 1 scale division. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
Eight hydrometers 500-231 thru 500-238 below, covering the range from .700 to 2.000 A thermometer range 0/230 °F is included. Supplied in a sturdy foam cushioned case with carrying handle. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
.070° Specific Gravity ranges, 6″ length. Made to the same exacting standards as ASTM hydrometers, these units have found wide application due to their slightly longer, overlapping ranges. Accuracy to +/- .001 Specific Gravity. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
.070° Specific Gravity ranges, 13″ length. Made to the same exacting standards as ASTM hydrometers, these units have found wide application due to their slightly longer, overlapping ranges. Accuracy to +/- .0005 Specific Gravity. Each hydrometer can be ordered with or without NIST Traceable Report of Test by adding or removing the "C" to the catalog number.
